A Type 2 surge protective device (SPD) helps limit short-lived overvoltages in a low-voltage electrical installation. Distribution panels and machine control panels are typical places to assess Type 2 protection against surges associated with switching or indirect lightning effects.
How do Type 1, Type 2 and Type 3 SPDs differ?
| SPD type | Typical role |
|---|---|
| Type 1 | Protection at the service entrance where the assessment identifies exposure to lightning current |
| Type 2 | Protection at distribution panels or other stages where switching surges and indirect lightning effects are a concern |
| Type 3 | Local protection near sensitive equipment as part of a coordinated design |
These roles can be used together. A protection design takes into account the installation, its exposure and the equipment it serves.
Where is a Type 2 SPD considered?
In industrial facilities, examples include subdistribution panels feeding production lines, panels serving drives or automation equipment, and machine control panels. In commercial buildings, the assessment can include floor distribution boards, building services panels and panels that feed critical equipment. The panel’s location and what it feeds help determine where Type 2 protection fits.
What should you check when selecting a Type 2 SPD?
- Supply and earthing. Identify the supply voltage, the earthing arrangement and the panel’s role in the distribution system.
- Device ratings. Compare the data-sheet values for maximum continuous operating voltage (Uc), voltage protection level (Up), nominal discharge current (In) and maximum discharge current (Imax) with the design requirements.
- Coordination. Review how the proposed device fits with any existing SPDs and short-circuit protective devices.
- Installation and maintenance. Check the manufacturer’s instructions for mounting and connections, any specified backup protection, and how the maintenance team can see the device’s status.
For a panel review, gather the panel location, supply voltage, earthing arrangement and the list of equipment it feeds. Include the model of any existing SPD if available.